|
|
May 24, 2025 –
A laboratory test was developed to assess the fracture splitting characteristics on small quantity laboratory processed lots to aid in the development of splittable steel compositions and forging process controls.
|
|
|
|
|
May 24, 2025 –
The objective of this paper is to provide SME’s with the comprehensive technology and know-how to produce cost-effective magnesium forged components.
|
May 24, 2025 –
This paper will review in detail each coating type and describe the proper coating techniques to achieve the optimum results and benefits to the forger.
|
May 24, 2025 –
The present report is intended to provide a review of the activities conducted during the last Stage 6 of this program. The major activities accomplished during this stage were directly related to comparing the response of the microstructure and
mec
|
May 24, 2025 –
The Forging Industry Association and its Forging Foundation are governed by a Board of Directors and Board of Trustees respectively.
|
May 24, 2025 –
The overall objective of this study is to develop a digital twin as an integral part of a forging system, upon which the physical machine and virtual/cyber machine harmoniously communicate and deliberate the influence of “inherent disturbances” on th
|
May 24, 2025 –
This ongoing study aims to reduce die wear through application of proprietary hot-work tool steels and ceramic-based materials through combination of computational analysis and shop floor experimentation.
|
May 24, 2025 –
This article discusses simulating microstructural evolution during the hot working of alloy 718.
|
May 24, 2025 –
In the metal forming industry, elimination of internal defects is a prerequisite to avoid catastrophic failure of workpieces. The two different approaches used in the literature to study void closure, respectively at the process-scale and void-scale,
|
May 24, 2025 –
In the present investigation magnesium alloys AZ31 and ZK60 have been forged using a two step forging process.
|
May 24, 2025 –
Developing a phenomenological equation to predict yield strength from composition and microstructure in β processed Ti-6Al-4V
I. Ghamarian a,1, B.Hayesb, P.Samimi a,1, B.A.Welk c, H.L.Fraser c, P.C.Collins a,n,1 a Department of Materials Science an
|
May 24, 2025 –
In this investigation the evolution of austenite and subsequent transformation product microstructures in a 0.22% V modified 1045 steel is evaluated as a function of austenitizing temperature
|