Simulation and Modeling

Simulation of Centerline Defect Closure in Open Die Forging By Suhasini Gangatirkar

FIERF Sponsored Master Thesis of Suhassini Gangatirkar Illinois Institute of Technology

Backward Simulations using Modified Upper Bound Elemental Technique (MUBET) for Preform Design in Forging Process

Mazyad Almohaileb, Ohio University, American Axle and Manufacturing, Inc.

Enhanced capability of metal forming simulation tools - a pioneering approach to simulate real process behavior

Dr. Ralph Bernhardt, simufact engineering gmbh, Germany
Arjaan Buijk, Simufact-Americas LLC
Daniela Steffes-Lai, Fraunhofer SCAI, Germany

Simulating Grain Size in Nickel Alloy Forgings

John Walters, Alex Bandar, Mike Foster - Scientific Forming Technologies Corporation
Ernie Gibson - Canton Drop Forge

Computer-Assisted Design of Pre-Form and Finisher Dies for Cold Forging of Aluminum

Jamie Corcoran, Erik Hahn, Barrett Marion, Jonathon Pangbom, Jeffrey Spencer, Magnet School Professor Walter W. Milligan, Michigan Technological University. 2000 Forging Achievement Award Student Paper.

Criterion for Prevention of Central Bursting in Forward Extrusions Through Spherical Dies Using the Finite Element Method

S. Sriram and C.J. Van Tyne, Journal of Manufacturing Science and Engineering, ASME, vol. 124, 2002, pp. 65-70. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Finite Element Analysis of Forging Die Using Solidworks and Algor

David Carroll, Magnet School Professor John Frater, Cleveland State University. 2000 Forging Achievement Award Student Paper.

Finite Element Analysis of a Forging Die Whose Cavity Was Obtained by Reverse Engineering Techniques

Andrew Somrack, Cleveland State University.

Hot Impression Die Forging Process Parameter Development for Production of 6061 Aluminum Alloy Medallions
Luka Dugandzic, California Polytechnic State University.
Modeling of Heat Cycles for Large Forgings

C.J. Van Tyne and G.A. Brada, in Proceedings of 12th International Forgemasters Meeting, Cleveland, Ohio, 1994, vol. 1, pp. 5.6-1 to 5.6-12. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Modeling of Heating and Heat Treating Cycles for Large Forgings

G.A. Brada and C.J. Van Tyne, published in Process Controls and Instrumentation Section of Industrial Heating, 1996, pp. 45-51. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Modeling of Heating Cycles for Large Forgings Using a PC-Based Program

C.J. Van Tyne, R.B. Focht, T.D. Nelson, and W. Reese, in Proceedings of 35th Mechanical Working and Steel Processing Conference, ISS, Warrendale PA, 1993, pp. 217-222. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center

Modeling of Open Die Forging Processes

C.J. Van Tyne, in Proceedings of 31st ISS Mechanical Working and Steel Processing Conference, ISS, Warrendale, PA, vol. XXVII, 1990, pp. 209218. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center

Optimization of Open Die Forging of Round Shapes Using FEM Analysis

S.K. Choi, M.S. Chun, C.J. Van Tyne and Y.H. Moon, Journal of Materials Processing Technology, Vol. 172, 2006, pp. 88-95. (pdf)
Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Process Analysis of Multistage Forging Using Finite Element Method
K.S. Park, C.J. Van Tyne, and Y.H. Moon, Journal of Materials Processing and Technology, Vol. 187-188, (2007), pp. 586-590. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.
Review of Process Modeling for Prediction of Microstructures and Properties for Metal Deformation Processes

C.J. Van Tyne and L.P. Turner, in Proceedings of North American Forging Technology Conference, ASM, Materials Park, OH, 1994, pp. 43-49. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Simulating Microstructural Evolution During the Hot Working of Alloy 718

M.C. Mataya, JOM, vol. 51, no. 1, January 1999, pp. 18-26. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Thermal Modeling of Open Die Forgings Using Microcomputer Programs

C.J. Van Tyne and R.B. Focht, in Proceedings of 1994 NSF Design and Manufacturing Grantees Conference, MIT, Cambridge, MA, 1994. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center

Thermal-Mechanical Modeling of Stainless Steel Forgings

Arthur A. Brown, Sandia National Laboratories, Presented at 2011 Forging Industry Technical Conference.