Non Ferrous

The Effects of Forging on the Microstructure and Tensile Properties of Magnesium Alloys AZ31 and ZK60 Microstructure Evolution in INCOLOY® 945 During Hot Deformation Comparison of Single and Multiple Pass Compression Tests Used to Simulate Microstructural Evolution During Hot Working of Alloys 718 and 304L

M.C. Mataya, E.R. Nilsson, and G. Krauss in Proceedings of Superalloys 718, 625, 706, and Derivatives Symposium, Edited by E.A. Loria, TMS, Warrendale, PA, 1994, pp. 331-343. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Effects of Multiple Reductions on Grain Refinement During Hot Working of Alloy 718

M.C. Mataya and D.K. Matlock in Superalloy 718, Metallurgy and Applications, Edited by E.A. Loria, TMS, Warrendale, PA, 1989, pp. 155178. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

An Examination of Hot Deformation and Recrystallization of Alloy 167

A.C. Perry, C.J. Van Tyne, and F.S. Suarez, Proceedings of 2nd International Conference on Heat Resistant Materials, ASM International, Materials Park, OH, 1995, pp. 267-273. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Flow Behavior of INCOLOY 945 During High Temperature Deformation

Steve Coryell, Colorado School of Mines, 2009 FIERF Fellowship, Presented at 2011 Forging Industry Technical Conference.

Grain Refinement During Primary Breakdown of Alloy 718

M. Mataya, M. Robinson, D. Chang, M. Weis, G. Edwards, and D.K. Matlock in Proceedings of 29th Mechanical Working and Steel Processing Conference. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

Grain Size Control in Ring-Rolled Alloy 718

in Proceedings of Superalloys 718, 625, 706, and Derivatives Symposium, D.R. Nielsen, S.W. Thompson, C.J. Van Tyne, and M.C. Mataya, Edited by E.A. Loria, TMS, Warrendale, PA, 1994, pp. 373-392. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

The Hot Deformation Behavior of an As Cast Alloy 718 Ingot

M.J. Weis, M.C. Mataya, S.W. Thompson, and D.K. Matlock in Superalloy 718, Metallurgy and Applications, Edited by E.A. Loria, TMS, Warrendale, PA, 1989, pp. 135154. Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center.

MagForge: Cost Effective Ways to Forge Magnesium

Fabrice Chevaleyre, Association Francaise de Forge, Presented at 2011 Forging Industry Technical Conference.

Recrystallization and Grain Growth in Nickel 706 Forgings

Kate Felde, Magnet School Professor David Schwam, Case Western Reserve University. 2003 Forging Achievement Award Student Paper.

Oxidation behavior of binary Ti-xW (0 ≤ x ≤ 30, wt%) alloys at 650â—¦Cas a function of W concentration

P. Samimia,b,∗, P.C. Collins a,b aDepartment of Materials Science and Engineering, Iowa State University, Ames, Iowa, 50011, United States bThe Center for Advanced Non-Ferrous Structural Alloys (CANFSA), a joint NSF I/UCRC between the Colorado School of Mines (Golden, CO 80401) and the Iowa State University (Ames, IA 50011), United States.  Provided to FIA Members by the Center for Advanced Non-Ferrous Structural Alloys (CANFSA). 2016

Developing a phenomenological equation to predict yield strength from composition and microstructure in β processed Ti-6Al-4V

I. Ghamarian a,1, B.Hayesb, P.Samimi a,1, B.A.Welk c, H.L.Fraser c, P.C.Collins a,n,1 a Department of Materials Science and Engineering, Iowa State University, Ames, IA 50011, USA b Department of Materials Science and Engineering, University of North Texas, Denton, TX 76203, USA c Department of Materials Science and Engineering, The Ohio State University, Columbus, OH 43210, USA.  Provided to FIA Members by the Center for Advanced Non-Ferrous Structural Alloys (CANFSA), a joint NSF I/UCRC between the Colorado School of Mines and the Iowa State University. 2016

On the influence of alloy composition on the oxidation performance and oxygen-induced phase transformations in Ti–(0–8) wt%Al alloys

P. Samimi1,4, D. A. Brice1, R. Banerjee2,4, M. J. Kaufman3,4, P. C. Collins 1,4
1 Department of Materials Science and Engineering, Iowa State, University, Ames, IA 50011, USA
2 Department of Materials Science and Engineering, University of North Texas, Denton, TX 76203, USA 3 Department of Metallurgical & Materials Engineering, Colorado School of Mines, Golden, CO 80401, USA 4 Center for Advanced Non-Ferrous Structural Alloys (CANFSA), an NSF-I/UCRC between the Iowa State University (Ames, IA) and the Colorado School of Mines (Golden, CO), USA. Provided to FIA Members by the Center for Advanced Non-Ferrous Structural Alloys (CANFSA). 2016

Microstructural Evolution in Microalloyed Steels with High-Speed Thermomechanical Bar and Rod Rolling

Robert Cryderman, Blake Whitely, and John Speer, Advanced Steel Processing and Products Research Center, George S. Ansell Department of Metallurgical and Materials Engineering, Colorado School of Mines, Golden Colorado, USA.  Provided to FIA Members by Colorado School of Mines Advanced Steel Processing and Products Research Center. 2016