Additive Manufacturing

Investigating the effect of processing parameters on microstructure and mechanical behavior of 316 SS fabricated via binder jet followed by forging (December 2022) Characterization of a High Entropy Alloy Welding Process for Application to Forging Dies, Michael T. Wall1, Darryl Hammock2 and Marcus Young 1, 1 University of North Texas 2 Weld Mold Company, FIERF Funded Research, November, 2018 Micro Grant - Final Report Modeling and Experimental Comparison of Effects of a Forging Post-Process on Additive Manufactured Metallurgy Professor Timothy Cyders, Ohio University, Athens, OH, FIERF Funded Research, November, 2017


Applications of Additive Manufacturing in Forging D. Schwam* and B. Silwal**, *Case Western Reserve University, Cleveland, OH and **Georgia Southern University, Statesboro, GA, FIERF Funded Research, October 2017 Determining Cost-Effectiveness of Additive Manufacturing vs Forging: Hand Tools Senvol LLC, Case Western Reserve University, FIERF funded research November 2016 Microstructural Control of Additively Manufactured Metallic Materials P.C. Collins, 1,2, D.A. Brice,1 P. Samimi,1 I. Ghamarian,1 and H.L. Fraser3 1Department of Materials Science and Engineering, Iowa State University, Ames, Iowa 50011; 2Ames Laboratory, Iowa State University, Ames, Iowa 50011 3Department of Materials Science and Engineering, The Ohio State University, Columbus, OH. Provided to FIA Members by the Center for Advanced Non-Ferrous Structural Alloys (CANFSA), a joint NSF I/UCRC between the Colorado School of Mines and the Iowa State University. 2016